新资讯！莆田市美孚大桶208导热油，齿轮油批发销售处美孚传热油 Mobiltherm 是产品，用于密闭间接加热装置。它们由高度精练的基础油配制而成，具有抗热裂化和化学氧化的性能。 本系列产品传热效率好，其的粘度特性使之在启动时和运行温度下都能够轻易泵送。由于它们在推荐运行温度下具有抗热裂化性能，这些油品的闪点在使用中不会明显降低。美孚传热油 Mobiltherm 产品热稳定性很好，使用寿命极长，而且在使用中不会出现积垢 或粘度增加。 本系列产品还表现出特别的加热与热传导特性，散热更。美孚传热油 Mobiltherm 推荐用于各种工业过程的密闭式 和开放式冷油密封间接加热与冷却系统。
应用范围
美孚传热油 Mobiltherm 603 和 美孚传热油 Mobiltherm 605 可以用于开放和密闭装置中，但油体平均 温度应在下表所示 的温度范围 内且停机温度不 -6oC。具体应用范围和建议如下：
美孚传热油 Mobiltherm 603 美孚传热油 Mobiltherm 605
密闭系统-6oC ~ 285oC -6oC ~ 315oC
开放式系统 -6oC ~ 150oC -6oC ~ 180oC
在油体平均温度不超出上表所示的温度和大气压力下运行的各种工业过程中采用冷油密封的密闭式间接加热和冷却系统。
开放式系统，但油体平均温度不得超出上表所示的温度。Mobiltherm is a high-performance product used for sealing indirect heating devices. They are made of highly refined base oil and have the properties of thermal cracking and chemical oxidation. This series of products has good heat transfer efficiency, and its excellent viscosity features make it easy to pump at start-up and operating temperature. Because of their thermal cracking resistance at recommended operating temperature, the flash points of these oils will not be significantly reduced in use. Mobiltherm products have excellent thermal stability, long service life, and no increase of scale or viscosity in use. This series of products also show special heating and heat conduction characteristics, heat dissipation more quickly. Mobiltherm Mobiltherm recommends indirect heating and cooling syst for various industrial processes of closed and open cold oil.
Range of application
Mobiltherm Mobiltherm 603 and mobil heat transfer oil Mobiltherm 605 can be used for open and closed devices, but the average temperature of the oil body should be no less than -6oc at the temperature range shown in the table below. Specific application ranges and Suggestions are as follows:
Mobil heat transfer oil Mobiltherm 603 mobil heat transfer oil Mobiltherm 605
Airtight system - 6oC ~ 285oC - 6oC ~ 315oC
Open system - 6oC ~ 150oC - 6oC ~ 180oC
A closed indirect heating and cooling system used in a variety of industrial processes that operate under the highest temperature and atmospheric pressure in the upper table.
Open system, but the average temperature of the oil body shall not exceed the maximum temperature shown in the above table
