啧啧啧！漳州市美孚超级齿轮油，美孚605导热油代理商电话
产品简介
美孚传热油 Mobiltherm 是产品，用于密闭间接加热装置。它们由高度精练的基础油配制而成，具有抗热裂化和化学氧化的性能。 本系列产品传热效率好，其的粘度特性使之在启动时和运行温度下都能够轻易泵送。由于它们在推荐运行温度下具有抗热裂化性能，这些油品的闪点在使用中不会明显降低。美孚传热油 Mobiltherm 产品热稳定性很好，使用寿命极长，而且在使用中不会出现积垢 或粘度增加。 本系列产品还表现出特别的加热与热传导特性，散热更。美孚传热油 Mobiltherm 推荐用于各种工业过程的密闭式 和开放式冷油密封间接加热与冷却系统。
特性与优点
美孚传热油 Mobiltherm 油品是美孚特种油的产品，以其在恶劣应用条件下的性能与可靠性受到认可。 采用现代化的精练 工艺是这些产品具有性能特性的一个关键因素。
美孚传热油 Mobiltherm 603 和 605 具有以下优点：
特性
优点及潜在效益
抗热裂化和分解性能高 不出现油泥和积碳，对传热能力影响少，所需维护少
热性能佳 高传热率和运行效率，较低运行成本
热和氧化稳定性好 具有长期无故障使用寿命，较少停工时间
低温流动性好 冷系统启动容易Product introduction
Mobiltherm is a high-performance product used for sealing indirect heating devices. They are made of highly refined base oil and have the properties of thermal cracking and chemical oxidation. This series of products has good heat transfer efficiency, and its excellent viscosity features make it easy to pump at start-up and operating temperature. Because of their thermal cracking resistance at recommended operating temperature, the flash points of these oils will not be significantly reduced in use. Mobiltherm products have excellent thermal stability, long service life, and no increase of scale or viscosity in use. This series of products also show special heating and heat conduction characteristics, heat dissipation more quickly. Mobiltherm Mobiltherm recommends indirect heating and cooling syst for various industrial processes of closed and open cold oil.
Characteristics and advantages
Mobiltherm oil is the leading product of mobil brand special oil, which is recognized for its performance and reliability under poor application conditions. The adoption of the most modern techniques is a key factor in the performance of these products.
Mobil heat transfer oil Mobiltherm 603 and 605 have the following advantages:
features
Advantages and potential benefits
The thermal cracking and decomposition performance of oil sludge and carbon deposition are high, with minimal impact on heat transfer capacity and minimum maintenance
Thermal performance high heat transfer rate and operation efficiency, lower running cost
The thermal and oxidation stability is good for long - term failure service life, less downtime
Low temperature fluidity cold system startup easy
