1.SelectIF 2040
SelectIF 2040 is a VOC-free and no-clean soldering flux developed for selective soldering. The flux combines a wide process window in selective soldering with low residue formation. SelectIF 2040 is suitable for soldering units with high thermal mass and hence high temperatures and long process times. Due to its special composition, it leaves less residues after soldering than the conventional fluxes for selective soldering. SelectIF 2040 tends to give low solder balling after soldering. The flux is compatible with leadfree and SnPb alloys Additionally, the flux is absolutely halogen free, guaranteeing a high reliability after soldering.
2.Interflux PacIFic 2009M
The Interflux PacIFic 2009M is an environmental friendly flux especially developed without the use of any volatile organic compounds. The flux does not contain any halides, neither rosins nor resins. The absence of rosin and resin will give very low ICT contact problem faults. PacIFic 2009M has very good wetting capacity and excellent soldering on all popular board finishes. It is suitable for soldering with normal SnPb and leadfree alloys and for components and PCB-finishes with critical solderability. PacIFic 2009M allows a changeover from alcohol based fluxes to water based fluxes with absolutely no disadvantages.
3.Interflux PacIFic 2009MLF
PacIFic 2009MLF has been developed to minimize micro solder ball formation. It is an adapted version of the PacIFic 2009M. Conventional VOC-free fluxes may give more solder balling than alcohol based fluxes on micro ball sensitive solder masks. PacIFic 2009MLF minimises micro solder balling on these solder masks. PacIFic 2009MLF is absolutely halogen free. The flux allows a change over from alcohol based fluxes to water based fluxes with absolutely no disadvantages. PacIFic 2009MLF is perfectly suitable for lead-free soldering and is typically applied by sprayfluxing.
4.Interflux PacIFic 2010F
The Interflux PacIFic 2010F is an environmentally friendly water based flux, without any volatile organic compounds VOC free. The flux can be applied by means of foam, spray or dip fluxing. PacIFic 2010F is absolutely halogen free, making it a very safe flux with high reliability properties. The flux does not contain rosins nor resins. This will result in very low ICT contact problem faults. PacIFic 2010F can be used for both SnPb and lead-free soldering applications.
