1.描述
Cobar&16094Q-MB助焊剂无卤素环保&160、固态含量低、低残留焊后免清洗、酸值偏低（对板子，焊点没有腐蚀）。这款产品是博世集团在所属公司的一款助焊剂，配方悠久、活性极强、对消除锡球更具有，Cobar当初推广时称为锡球杀手
2.应用
Spray fluxing is the preferred application to apply this flux. Make sure that the unit has a stable and uniform spray-cone.
The flux should have the finest lets at the lowest possible setting for the atomizing air pressure. Low air pressure give
bigger and unstable lets high air pressure cause bouncing effects of the flux against the PCB surface.
Use a scrap/bare board to set-up the spray parameters. Turn the board ide down after spraying for inspection. It is
essential that a continuous, uniform spray pattern has been deposited all across the board.
