设备名称：自动液压模架
Name: Automatic Hydraulic Mould Carrier
型号：HC-M2000/14型
Type: HC-M2000/14
数量：1台
QTY: 1 sets
电器控系统: 1套
Electric control system: 1 sets
设备技术参数明细/technique parameters list
模板锁紧面尺寸 2100mm*1400mm
Plate size 2100mm*1400mm
闭合高度 300-900mm 可调
Height of Closing 300-900mm adjustable
开模角度 0-60°
Upper plate tilting to open 0-60°
锁模力 200kn
Closing force 200KN
开模力 70kn
Opening force 70KN
下模板行程 200mm
Lower plate stroke 200mm
开、闭模时间 12s
Complete opening/closing time 12s
模具固定栓 DIN 650-18H12-(16)
Tools fixation slots DIN 650-18H12-(16)
模具温度 50°-80°
Mould temperature 50°-80°
控制电压 DC24V
Control power DC24V
生产流程说明：
Producing process:
- 液压系统固定在地面上，驱动1台模架开闭动作
Hydraulic system is fixed on the floor, which is used to drive mould carrier opening and closing.
- 锁模流程：整理模具-喷脱模剂-安全钩脱钩-合模-锁模缸启动锁模-液压缸顶出模架-闭模灌注-熟化-开模
Mould locking process: clean mould-spray release agent-safety hook release-close mould-cylinder start-closing inject-curing-open
灌注方式：闭模式灌注
Injection way: closing injection
控制操作系统：一套
Control system: 1 set
采用西门子公司PLC控制，OP操作系统具有强大的功能菜单，显示压力、时间、温控、生产参数设定、安全监控、警示等。
PLC adopts Germany SIMENS; touch screen has powerful menu function, which can display the pressure, time, temperature control, producing parameters, safety monitoring, alarm and so on.
模具加温设备：1台
Heating equipment: 1 set
- 功率12KW*1台通过水循环分别给2套液压模具加温及温度控制
1 set of 12 kw cycle water to heat the mould and control the temperature.
- 可分别实行独立温控
Control the temperature separately.
设备安全保护系统：
Safety system:
- 整套模架升降开闭由液压系统自动完成
The mould carrier’s lift, opening and closing are finished by hydraulic system.
- 模架配有防脱落机械保险装置
Anti fall mechanical safety device.
- 模具两侧装有红外线光栅安全感应器
There are red-ray barrier sensors on the both 2 sides of the mould carrier.
- 设备设有急停及安全自动警示装置
Emergency stop and alarm system
- 设备配有防护栏
The equipment has light barriers.
惠州市和成机械设备有限公司 188 9634 6260
