混流泵使用与保养：Use AndMaintenance? ? 1、经常检查轴承温度，混流泵安装，轴承箱内应装70%的钙基黄油，不得过多或过少，雨水混流泵安装，轴承升温一般不得比周围超过35°C，轴承的极限温度不得超过75°C（用手摸感到烫手），若超过应停车检查原因予以消除。Check the bearing temperatureregularly.The bearing box should be put 70% butter，it can not be too much ortoo little.The temperature rising of bearing can not be more than 35°C higherthan around temperature and the limiting temperature of bearing is 75°C，if the temperature is higher than 75°C，农业混流泵安装， stop to check the reason and adjust it.
混流泵8、水泵在冬季使用时，停车后应将水泵内和管道内的存水放尽以防冻裂。If use the pumpin winter，排涝混流泵安装， pls run off the water from the pump and pipes.? ? 9、水泵每使用一个灌溉季节后，应更换润滑黄油后存放。Replace thelubricating oil after using the pump for one irrigation season.10、水泵工作满500小时，应仔细拆卸检查零件的磨损情况，如长期停用，应将运转部分拆下擦干上油妥善保管。（一）HW型混流泵由泵体、泵盖、叶轮、泵轴和轴承体等主要零件构成。I. HW Mixed-flowpump is composed of pump casing， pump cover， impeller， pump spindle and bearingbody mainly.水泵转向? ? ? ? ?从水泵进水口看叶轮为逆时针方向旋转（即箭头所示方向旋转。）V. ? ?Pump Diversion? ? ?Look from inlet of pump， the impeller isturning clockwise(turning as the direction indicated by rotation arrow) 金石泵业(图)-排涝混流泵安装-混流泵安装由泰安金石泵业有限公司提供。泰安金石泵业有限公司（www.tajsby.cn）实力雄厚，信誉可靠，在山东 泰安 的污水泵、杂质泵等行业积累了大批忠诚的客户。公司精益求精的工作态度和不断的完善理念将引领金石泵业和您携手步入，共创美好未来！ 产品：金石泵业供货总量：不限产品价格：议定包装规格：不限物流说明：货运及物流交货说明：按订单
