同时双层滚筒输送机采用一台电机进行驱动，和独立的两台滚筒线相比，辊道厂家，节约了一台电机和电控装置的开支，这样为企业节约了成本，但是要注意在设计时要注意两层滚筒线之间的高度要高于物料的高度。At the same time， a double layer roller conveyor is driven by a motor. Compared with the two independent? lines， it saves the expenses of an electric motor and electronic? device. This saves the cost for the enterprise， but attention should be paid to the height of the two layers of the roller line when the design is higher than the material.
辊道的传动形式有集体传动，单独传动和空转辊道三种。①集体传动辊道——由一台电动机同时带动所有的或其中一部分辊子。通常是4~10根辊子。②单独传动辊道——每个辊子或每两个辊子由一个单独电动机带动。The drive form of the roller table has three types: collective drive，辊道生产商， single drive and roller table.(1) a collective drive roller - a motor that drives all or some of the rollers at the same time. It is usually the 4~10 root roller.(2) a separate drive roller track - each roller or two rollers are driven by a single motor.特别是输出辊道，圣霖国际辊道，过去多采用上述方法对中，但是近有把辊距缩小的倾向，因而采用后一种斜辊布置方式的辊道正在减少。这是为了在轧制薄规格的带钢时避免使带钢在辊道上因终轧速度高而造成折叠。此外，辊道，对于辊道的速度和辊子直径也要充分考虑好。In particular， the output roller table used to use the above methods in the past， but recently there is a tendency to narrow the distance between rolls. Therefore， the roller table with the latter one is decreasing. to avoid folding the strip on a thin strip of strip to avoid the high finishing speed of the strip on the roller. In addition， the speed of the roller and the diameter of the roller should be fully cidered. 辊道生产商-圣霖国际(在线咨询)-辊道由鞍山市圣霖进出口贸易有限公司提供。鞍山市圣霖进出口贸易有限公司（shenglininternational.cn）有实力，信誉好，在辽宁 鞍山 的行业设备等行业积累了大批忠诚的客户。公司精益求精的工作态度和不断的完善理念将促进圣霖国际和您携手步入，共创美好未来！ 产品：圣霖国际供货总量：不限产品价格：议定包装规格：不限物流说明：货运及物流交货说明：按订单
