出售-回收E8363C回收，E8363C网络分析仪，E8363C网络分析仪
仪器仪表哪家强 到深圳观澜找鸿翔
深圳市鸿翔仪器有限公司
联系人: 谢先 手机：13715029919 【微信】
服务QQ：317277835
直线电话：0755-29431800
Mail:317277835@qq.com
网站 http://shop13715029919.m.taobao.com
地址：深圳市宝安区观澜大道玫瑰苑A2-501号
选用我公司二手仪器的优势是：
1、与新购仪器几个月的供货期相比，购买二手仪器的供货期要短的多。
2、在时间就是市场的今天，优势无疑是为明显的。
2、二手仪器的价格便宜，基本为新购仪器价格的20%～50%。在电子技术迅 速发展的今天，仪器的更新也在加快，投资越少则风险越小。
3、为了让您放心地使用我们提供的二手仪器，我们销售的二手仪器可以做到：保修半年到一年不等
深圳鸿翔仪器销售，租赁，回收
二手频谱分析仪，信号源，网络分析仪，示波器，无线电综合测试仪，音频分析仪,噪声系数分析仪，WIFI测试仪，手机综合测试仪，EMI测试仪，天馈线分析仪，色彩分析仪，综合测试仪，蓝牙测试仪,功率计，频率计，校准件，函数信号发生器，电源GPIB卡，万用表，衰减器等测试仪器，等高频仪器
主要经营：
Agilent/HP【安捷伦/惠普】、是德（Keysight）、chroma【可罗马】 Tektronix【泰克】、Advantest【爱德万】、Anritsu【安立】、R/S【罗德 施瓦茨】、IFR【原Marconi马可尼】、Fluke【福禄克】、横河（Yokogawa）、吉时利（Keithley）、Iwatsu【岩崎】、Goodwill【固纬】等品 牌长期多台现货供应出售、出租，成色新。的产品,的技术.的价格…让服务从满意到感动-你的满意是我们公司的追求.
回收工厂闲置/倒闭电子仪器，个人处理仪器，欢迎来电
产品型号:E8363C
产品:Agilent 、HP
产品指标:10 MHz to 40 GHz
详细说明
110 dB of dynamic range 0.006 dB trace noise
26 usec/point measurement speed, 32 channels, 20,001 points
TRL/LRM calibration, on-wafer, in-fixture, waveguide, and antenna measurements
Mixer conversion loss, return loss, isolation, and absolute group delay
Amplifier gain compression, harmonic, IMD, and pulsed-RF
Table 2. Receiver Dynamic Rangea
Deion Specification
dB at Test
Portb
Typical dB at Direct
Receiver Access Inputc
Dynamic Range in a 10 Hz BW
Standard Configuration and Standard Power Range E836xB/C - Standard
OR
Standard Configuration and Extended Power Range & Bias Tees E836xB/C - Option UNL
10 MHz to 45 MHzd 82 typical NA
45 MHz to 500 MHze 94 NA
500 MHz to 2 GHz 119 NA
2 GHz to 10 GHz 122 NA
10 GHz to 20 GHz 125 NA
20 GHz to 30 GHz 114 NA
30 GHz to 40 GHz 111 NA
40 GHz to 50 GHz 111 NA
Option 016 degrades
performance by 2 dB.
Configurable Test Set and Standard Power Range E836xB/C - Option 014
OR
Configurable Test Set and Extended Power Range & Bias Tees E836xB/C - Option 014/UNL
10 MHz to 45 MHzd 82 typical 132
45 MHz to 500 MHze 94 132
500 MHz to 2 GHz 119 138
2 GHz to 10 GHz 122 137
10 GHz to 20 GHz 124 139
20 GHz to 30 GHz 113 125
30 GHz to 40 GHz 110 122
40 GHz to 50 GHz 109 120
Option 016 degrades
performance by 2 dB.
a The receiver dynamic range is calculated as the difference between the noise floor and the receiver maximum output power. The effective
dynamic range must take measurement uncertainties and interfering signals into account.
b The test port receiver dynamic range is calculated as the difference between the test port noise floor and the receiver maximum input
level. The effective dynamic range must take measurement uncertainties and interfering signals into account.
c The direct receiver access input receiver dynamic range is calculated as the difference between the direct receiver access input noise floor
and the receiver maximum input level. The effective dynamic range must take measurement uncertainties and interfering signals into
account. This set-up should only be used when the receiver input will never exceed its compression or damage level. When the analyzer is
in segment sweep mode, the analyzer can have predefined frequency segments which will output a higher power level when the extended
dynamic range is required i.e. devices with high insertion loss, and reduced power when compression or receiver damage may occur i.e.
devices with low insertion loss. The extended range is only available in one-path transmission measurements.
d Typical performance.
e May be degraded by 10 dB at particular frequencies multiples of 5 MHz below 500 MHz due to spurious receiver residuals. Methods are
available to regain the full dynamic range.
Note: This E836xB/C document provides technical specifications for the following calibration kits only: 85056A,
85056D, 85056K, 85052B, 85052C, 85052D, 85050B, 85050C, 85050D, 85054B, 85054D, K11644A, P11644A,
R11644A, and the X11644A.
8
Table 2 Continued. Receiver Dynamic Rangea
De
